Download the latest version of Moveo Explorer here:

• Windows 64-bit
• Mac OSX 64-bit

Note: These downloads are password protected. If you are a current Moveo Explorer user and do not have the password, email us as support@apdm.com. If you would like to see more information about Moveo Explorer, visit our web page at www.apdm.com or email sales@apdm.com

Change Log

Current release: June 16, 2022

Updates, changes, and bug fixes in the June 16, 2022 release:

• Replacement of the log4j Java library to address a security vulnerability in the version previously bundled with this software. See this for more information.

Updates, changes, and bug fixes in the April 10, 2019 release:

• V1 Hardware Firmware versions (unchanged from previous release)
  • Access Point: 10/04/2016
  • Docking Station: 11/18/2015
  • Opal: 10/06/2016
• V2 Hardware Firmware versions (unchanged from previous release)
  • Access Point & Opal: 03/15/2019
• Fix for issue where Walk trials were re-analyzed at each launch of the application.

Updates, changes, and bug fixes in the March 29, 2019 release:

• V1 Hardware Firmware versions (unchanged from previous release)
  • Access Point: 10/04/2016
  • Docking Station: 11/18/2015
  • Opal: 10/06/2016
• V2 Hardware Firmware versions (new)
  • Access Point & Opal: 03/15/2019
• Important fix for battery charging behavior to minimize internal heating, increase battery charge, and extend battery life
• [Motion Studio Mode] Added support for high sample rates (20-800Hz), which can be configured in 1Hz increments. Note that you will be informed if you configuration exceeds the throughput of your access points. For example, one access point can only stream 800Hz data from up to 2 Opals.
• Support for configuring and extracting logged data from within Mobility Lab without having to exit to the Motion Studio View
• Updates to the logged data conversion manager to enable the enqueuing of multiple conversions to be performed at the same time.
• Improved orientation estimation algorithm.
• New "Data Transfer" export format to simplify transfer of analysis results into external database
• Asymmetry metrics calculated for bilateral metrics. These are (optionally) available for export in the Metric CSV formats (compact & verbose)
• Test/Condition filter in export dialog now functional
• Fix for date of birth viewing/exporting when performed outside of the timezone where the data was collected
• Now saving the timezone where each trial is collected to facilitate proper date handling
• Numerous small fixes and improvements

Updates, changes, and bug fixes in the June 14, 2018 release:

• V1 Hardware Firmware versions (unchanged from previous release)
  • Access Point: 10/04/2016
  • Docking Station: 11/18/2015
  • Opal: 10/06/2016
• V2 Hardware Firmware versions (new)
  • Access Point & Opal: 06/12/2018
• Added joint name to the range of motion drill-down and longitudinal plots.
• Added key and info popup for gait joint variability plots.
• Fixed formatting of the Free Form print view.
• Added functionality to display which joint angles will be calculated based on the currently configured hardware.
• Tests and test conditions can now be selectively hidden from the “New Test”->”Test Selection” screen to simplify the options.
• Increased precision of metric event timing from hundredths to thousandths of a second. This change does not prompt the user to re-analyze all data. If customers want this precision for past recordings, they can optionally re-analyze their recordings through the Tools->”Reanalyze Data”->”Force” option.
• Added ability to filter out PHI (subject name & date of birth) from both CSV and XML export formats.
• Enabled viewing of annotations within the raw data plots.
• Annotations can now be exported/re-imported when backing up your data.
• Added HTTP API to trigger export of data to the local hard disk. This enables some types of integration with external systems.
• Added support for exporting the audit log for the workspace. This log includes a time series of atomic modifications made in the workspace. Each entry documents the object that was edited (e.g., Subject X), the type of edit (create, update, or delete), the nature of the edit (e.g., subject ID changed from Y to Z), and the user logged in when the edit was made.
• Display all available metrics by default (which metrics are displayed can be controlled by the user)
• Added support for capturing button events while streaming. These end up in the resulting HDF file as would an annotation captured through the software recording interface.
• Updates to external synchronization logic to improve behavior on some systems with higher USB latency.
• Improved application locking to prevent multiple instances from being launched and conflicting with each other.
• Improved firmware/bootloader update logic to only update firmware if the bootloader is already up to date.
• Numerous small improvements and bug fixes.

Updates, changes, and bug fixes in the June 14, 2018 release:

• V1 Hardware Firmware versions (unchanged from previous release)
  • Access Point: 10/04/2016
  • Docking Station: 11/18/2015
  • Opal: 10/06/2016
• V2 Hardware Firmware versions (new)
  • Access Point & Opal: 06/12/2018
• Added support for capturing button events while streaming. These end up in the resulting HDF file as would an annotation captured through the software recording interface.
• Updates to external synchronization logic to improve behavior on some systems with higher USB latency.
• Improved application locking to prevent multiple instances from being launched and conflicting with each other.
• Improved firmware/bootloader update logic to only update firmware if the bootloader is already up to date.
• Numerous small improvements and bug fixes.

Updates, changes, and bug fixes in the December 29th, 2017 release:

• V1 Hardware Firmware versions (unchanged from previous release)
  • Access Point: 10/04/2016
  • Docking Station: 11/18/2015
  • Opal: 10/06/2016
• V2 Hardware Firmware versions (new)
  • Access Point & Opal: 12/19/2017
• V2 firmware update to fix enumeration issues on some USB chipsets

Updates, changes, and bug fixes in the December 4th, 2017 release:

• V1 Hardware Firmware versions (unchanged from previous release)
•    Access Point: 10/04/2016
•    Docking Station: 11/18/2015
•    Opal: 10/06/2016
• V2 Hardware Firmware versions (new)
•    Access Point & Opal: 12/03/2017
• V2 firmware update to fix "FILESYSTEM ERROR" issue
• V2 firmware update significantly increase runtime
• V2 firmware update to significantly reduce file sizes of logged data, increasing storage capacity 8x
• V2 firmware update to display remaining storage space (in hours) on the main display
• V2 firmware update to simplify the UI
• Printing of Free-Form plots
• Numerous bug fixes

Updates, changes, and bug fixes in the July 13th, 2017 release:

• V1 Hardware Firmware versions (unchanged from previous release)
•    Access Point: 10/04/2016
•    Docking Station: 11/18/2015
•    Opal: 10/06/2016
• V2 Hardware Firmware versions (unchanged from previous release)
•    Access Point & Opal: 07/06/2017
• Improved responsiveness of joint angle data plots
• V2 firmware update to fix issue where recordings may have constant values
• V2 firmware update to reduce the time between undocking the Opals and being ready to stream
• Fix for issue where assigning a trial to a different subject would sometimes fail
• Added ability to specify the default table style in the report view
• Clarified user interface option to complete an incomplete sequence

Updates, changes, and bug fixes in the June 2nd, 2017 release:

• V1 Hardware Firmware versions (unchanged from previous release)
•    Access Point: 10/04/2016
•    Docking Station: 11/18/2015
•    Opal: 10/06/2016
• V2 Hardware Firmware versions (new)
•    Access Point & Opal: 05/22/2017
• Introduction of a "Free Form" test which computes joint angles for any unknown activity
• Improved wireless streaming functionality to minimize latency -- particularly when recording from 7+ Opals at the same time
• Significant improvement in battery life for all recording modes
• Implemented parallel v2 firmware updates (7 at a time) to speed up the update process.
• Improved USB enumeration of devices in Windows
• Modified the "Import and Conversion Manager" to allow the conversion of logged data directly off of the Opals. This removes the requirement to first copy all of the files to your local hard drive before conversion.
• Fix to v2 Opal screen update issue, where the Opal display may have shown dated information (e.g., the previously configured label)
• Re-enabled wireless streaming from sample rates other than 128Hz
• Improved handling of sensor initialization to minimize errors that are sometimes encountered during undocking
• Added the ability to crop logged recordings based on v2 button events
• Added new "Logged Data Journal" tool
• Fixed logging of external synchronization events

April 17th, 2017 release (First Customer Release):

• V1 Hardware Firmware versions
•    Access Point: 10/04/2016
•    Docking Station: 11/18/2015
•    Opal: 10/06/2016
• V2 Hardware Firmware versions
•    Access Point & Opal: 04/17/2016